Operations

Process Audit for a Home Service Shop: Check the Work, Not the Paper

A process audit compares the work your team actually does with the written standard for that work. In a home-service shop, Mike Agugliaro teaches us to give each check to someone with fresh eyes, finish every check by the last working day of the month and close it with one decision: working, fix and reinspect, or rebuild and escalate.

This is an internal operating check for HVAC, plumbing and electrical owners. It is not a financial audit, a code inspection or a quality certification. It answers one blunt question: is the work still happening the way we say it happens?

Free Live Training

Fix Your Biggest Chokepoint in 60 Minutes

Structure, leadership, hiring, or getting out of the field. Step out of the daily chaos for one hour and work the constraint that is actually holding the company back.

See Our Next Training

The Process Exists. Is the Work Still Happening?

Mike tells a story from the customer side of the counter. A tech finished a repair at his house. The equipment was getting old, so Mike asked whether a salesperson could come out. The tech said yes and called the company's special sales line. Nobody picked up. Then days went by with no callback. When Mike tried to reach the company through its promotional text messages, the phone numbers in those texts did not work.

Somewhere in that company, someone believed there was a handoff from tech to sales. The customer never felt it. The lead died between the truck and the office, and nobody inside knew.

Mike's lesson is short: you will only be as profitable as your processes, and most companies do not check their processes enough.

So here is the question for our own shops. Which of our procedures only works in the office's imagination? If you still need to write the standard in the first place, write that standard first. This article picks up after that. It is about inspecting work that is supposed to be happening already.

Put a Monthly Process Audit on the Last Working Day

Mike's operating rule is simple. Every process in the company gets spot checked by the last working day of the month. It is mandatory, and everybody in the company owns part of it. By the end of that day, the results come back as a report, so the month does not close on a guess.

The value is in the hard finish line. A check that can happen "sometime this month" usually does not happen at all. A fixed completion point gives every inspector a deadline and gives the leader a moment to see which assignments came back and which did not.

A practical choice we suggest: hand out the inspection assignments early so people can catch a real instance of the work during the month instead of cramming everything into the final afternoon. Mike sets the completion point. How early you hand out assignments is your call.

Two guardrails. First, the monthly check sits alongside daily supervision and the faster checks you run after training or a process change. It does not replace them. Second, monthly never means waiting. If a CSR tells you mid-month that a booking step is broken, fix it that day. The month-end check is how you catch the problems nobody reported.

Give the Inspection to Fresh Eyes, Not One Overloaded Manager

The first instinct is to hand every check to the department manager. Mike tried exactly that. A manager came back and told him there was no way to get through dozens of processes in a single day. Instead of blaming the manager, Mike treated it as a problem he had not solved yet.

He found two problems. One was workload. A manager cannot inspect a whole library while a truck breaks down, a complaint comes in and the board needs attention. The other was familiarity. The person who runs a department tends to believe the process is working because they live inside it every day.

So Mike spread the inspections across the company and gave them to people outside the department being checked. In his examples, an outbounder inspects a warehouse process, a CSR inspects a dispatch process and a salesperson inspects a service-expert process. Because they are not in the work every day, they ask better questions. He describes these inspectors as bringing a fresh set of lenses.

Keep three jobs separate:

  • The process runner does the work every day.
  • The inspector observes the work and reports what they saw.
  • The correction owner is responsible for fixing whatever the inspector finds.

When those three blur together, findings get softened or lost. Who owns what should already be clear in your seats. An inspection report is not the place to redraw them.

One limit matters in the trades. Fresh eyes can spot a skipped step, a missing record or a handoff that never happened. They cannot sign off on electrical safety, code compliance or technical workmanship they are not qualified to judge. If an inspector sees something in that territory, they flag it and a qualified leader makes the call.

Use a Process Audit Checklist to Compare Paper With Reality

Mike's test for the report is whether the work is happening the same way the paperwork says it should. In his example, the inspector goes into another department, sits there, listens, makes notes and files a result. That is the whole posture: observe, compare, record.

You do not need a heavy form to do that. Here is an editorial spot-check aid we put together from Mike's teaching. It is not an official FuDog form, and you should adapt it to your shop.

  1. Name the process and pull the current written standard.
  2. Record who inspected it and when.
  3. Observe a real instance of the work where practical, not a walkthrough staged for the inspector.
  4. Note the step the standard expects.
  5. Record the step actually seen.
  6. Note the evidence, such as a completed record or a logged handoff, without exposing customer details.
  7. Choose one of the three decisions below.
  8. Name the correction owner and the next check, if a fix is needed.

If your scoreboard is pointing at a problem area, use the numbers on your shop's scoreboard to decide which processes deserve a closer look this month. The inspection itself is about behavior, not a new dashboard.

A fictional example to show the idea. Say the warehouse standard requires a record showing that material reached the tech for a scheduled install. The inspector watches a morning handoff and finds no completion record. That does not prove the material never made it to the truck. It proves the evidence is missing. The inspector asks what happened, writes down both the answer and the gap and passes it to the correction owner. Missing evidence and failed work are different findings. Treat them that way.

Close Every Check With One of Three Decisions

An inspection that ends with "looks fine, mostly" is not finished. Mike closes every check with one of three results. The labels below are our plain-language versions of his teaching.

DecisionWhat it meansNext action
WorkingThe work observed matches the written standardRecord the result and move on
Fix and reinspectA change is needed right awayMake the change, then check the revised work again
Rebuild and escalateThe process has fallen apart and needs a complete do-overCall an immediate management repair meeting before leaving that day

Working means the instance you checked matched the standard. It does not mean the whole department is perfect forever. Record it honestly and keep it modest.

Fix and reinspect is where most shops cheat. Someone edits the document, and everyone calls it solved. Mike's version requires the change to be inspected again. A rewritten step that nobody follows has fixed nothing.

Rebuild and escalate is for a process that has collapsed. Mike's examples of serious failures include a cash process and the flow of material to the service expert. When one of those epically fails, the person who found it does not wait for next month. They demand a repair meeting with leadership before they leave that day.

We are not prescribing the length of that meeting, who attends or what tool you use. The rule is simple: somebody owns the correction, somebody verifies the repair and a severe failure never gets buried until the next monthly check. And if the finding involves safety, nobody keeps doing unsafe work while waiting for a meeting.

One more boundary. This is a check on the process, not a grade on the person. If the finding really is about one employee's performance, review the person separately through your normal review rhythm.

Next Step

Grow and Scale a Home Service Business

Backed by $500 million worth of results. A real conversation with operators who wore the boots. No pitch theater.

Book a Call

Do Not Let Inspection Become Another Owner's Job

Mike's broader point is that the owner should be the spark, not the whole fire. Managers and team leaders are the ones who should keep improving processes. He pushes leaders to build or improve processes steadily so that improvements come from the people who feel the pain every day. Inspection findings are fuel for that work. Feed them to the people who own the process instead of collecting them on the owner's desk.

What about a small shop? Mike is clear that the habit applies whether you have one person or a large company. If it is just you, block the time and check your own processes by the last working day of the month. Be honest that self-review has blind spots. As you add people, start spreading the assignments. The leader still checks that open findings are actually closing, not quietly disappearing.

Build a Shop That Tells You What Is Broken

Most owners find broken processes the hard way: a customer complaint, a callback or a lead that never turned into a visit. A monthly process audit flips that. Your own people tell you what is working, what needs a fix and what needs a rebuild, before the homeowner has to.

That is part of what Life, Business, Wealth By Design means to us. The owner should not have to personally discover every broken handoff. If you want help putting that kind of rhythm into your shop, see how we work with home-service owners.

Ready to Check the Work, Not the Paper?

Want to learn how to grow and scale a home service business backed by $500 million worth of results?

Tell us which handoffs and processes you are tired of checking yourself, and we will talk through where the work and the paper have drifted apart. Our team works with HVAC, plumbing and electrical owners who still know the trade. Results are not guaranteed. This is educational guidance.

Book a Call

FAQ

What is a process audit in a home-service company?

A process audit compares how an existing process actually runs with its written standard, records any gap and decides what happens next. In an HVAC, plumbing or electrical shop, that means watching real work at the phones, warehouse or job handoffs. It is an internal operating check, not a financial audit, code inspection or certification.

How often should we inspect our processes?

Mike Agugliaro teaches a company-wide spot check finished by the last working day of each month. Keep your daily supervision, urgent corrections and checks after training or a process change. Monthly is the minimum rhythm for catching problems nobody reported. It is never a reason to wait on a failure you already know about.

Who should check the process?

Where staffing allows, assign someone outside the department, such as a CSR checking a dispatch process. Outsiders ask fresher questions than the people who run the work daily. Keep technical, safety and code judgments with qualified people. In a one-person shop, the owner checks their own processes and stays honest about the limits of self-review.

What should go on a process audit checklist?

Include the process name, the current written standard, the inspector and date, the step expected, the step actually observed and the evidence. Then record one decision: working, fix and reinspect, or rebuild and escalate. Add a correction owner and a next check when a fix is needed. Keep it short enough to use in the shop.

What happens if the process is completely broken?

Escalate the same day. The person who found it should push for a repair meeting with the responsible leader before leaving. Agree on the fix, name an owner and inspect the revised work afterward. Editing the document alone does not count as solving it, and unsafe work should stop rather than wait for a meeting.

FuDog Group helps home-service owners in boots build Life, Business, and Wealth By Design. Results depend on your market, execution, and follow-through. No guarantees, no fairy tales.